9lpm 7hp gas swashplate pump pressure washer
BS-170DSP improves cleaning efficiency by precisely controlling water pressure and flow.
- Customization: Available
- Quality warranty: 12 Months
- Transportation: ocean, land, air, express service
- After-sales service: technical support, provide spare parts
- Accessories: 1pc spray gun, 1pc spray wand, 1pc high pressure hose, 1pc filter, 1pc siphon hose, 5pcs color nozzles, 1pc toolkit, 1pc manual
9lpm 7hp Gas Swashplate Pump Pressure WasherDetails
introducing the BIOSN swashplate pump gas pressure washer, engineered for high consumer use with unwavering reliability and power. BISON gas pressure washer 9lpm has a powerful 7HP/210CC recoil start engine and multifunctional swash plate pump, designed by BISON manufacturing company.
The 7hp gas pressure washer has an operating pressure range of 154bar-180bar (2200psi-2610psi), and the high flow rate ensures a consistent water supply, even when using a high-pressure nozzle. Its impressive flow rate of 9 liters per minute (2.38 gallons per minute) means this product can cover more ground in less time, quickly removing dirt, grime, and debris.
At the core of the BS-170DSP is the innovative swash plate pump technology, which sets it apart from the axial cam pumps found in other high-pressure cleaners. The swash plate pump uses a unique mechanism that allows you to fine-tune the pressure output by adjusting the angle of the swash plate, allowing you to switch between a gentle rinse for delicate surfaces and a powerful blast for tough dirt. Great for everything from cleaning cars and decks to stripping paint and removing graffiti. With the BISON 9lpm pressure washer, you can also reduce the waste of water resources.
When it comes to quality assurance, BISON is known for its commitment to quality and durability that is second to none.Every BISON product undergoes rigorous testing and quality control measures, and the BS-170DSP is constructed with the finest components and a rugged design that ensures many years of dependable use.BISON is the manufacturer of cold water gasoline washers that you can count on.
Experience the BS-170DSP difference and order your 9lpm 7hp gas pressure washer with swash plate pump today!
| Model: | BS-170DSP |
| Working Presure: | 7hp//210CC recoil start |
| Flow Rate: | 3.4gpm/12.6lpm |
| Working Pressure | 154bar-180bar 2200psi-2610psi |
| GW |
28 |
| Flow Rate |
9lpm/2.38gpm |
| l*w*h |
55*46*53cm |
CONTACT US TO KNOW MORE BISON PRESSURE WASHER
BISON Pressure Washer Frequently Asked Questions
To properly store your pressure washer, you must first drain the gas from its motor and run it dry. The pump should have antifreeze run through it, and left inside the pump. This will protect the pump from freezing as well as protect the pump internally from corrosion caused by the water. In addition, it lubricated and protects the seals from drying out, making it ready to use at a moment’s notice. Disconnect all the hoses from the machine, empty them of liquids, and wipe them down. Store your pressure washer in a cool, dry space.
Refer to your User Manual for instructions on which oil to use for which part of your pressure washer. Most pumps use a 30W non-detergent oil.
There are many possible explanations for why your pressure washer isn’t reaching full pressure. Your packings could be worn down, causing your pump to be less effective and have less of a seal around its openings. Your inlet water valve could be clogged, or the filter could be plugged, and not enough water could be getting into the machine. There could be a kink in the hose. Etc. Contact our exceptional customer service team with other possible questions about why your pressure washer isn’t reaching full pressure.
1. Always disconnect your spray wand from the gun before cleaning your nozzles!
2. Clear the nozzle with a small rigid piece of wire such as a paper clip.
3. Flush the nozzle backwards with water.
4. Reconnect the wand to the gun
5. Restart the pressure washer and depress the trigger on the spray gun.
If the nozzle is still plugged or partially plugged, repeat number 1-4.
If the previous procedure does not clear the nozzle, replace with a new nozzle.
